Installation Manuals

for LS Fab Products

S10 Tailgate Saver Installation for 1994-2001 Chevy Truck

1. Remove Passenger side Taillight. 2. Drill a 5/16″ hole 3/4″ down from the lower taillight hole and 3/4″ back from box panel. *Reference Picture* 3. Attach longer ballstud with stainless support bracket vertical and low profile jam nut on inside of taillight opening. 4. Using the support bracket as a guide drill another 5/16 […]

OBS – Tailgate Saver Installation for 1988-1998 Chevy Trucks

*NOTE* If your truck has metal tailgate straps you will need to remove the driver side strap and rely on the passenger strap to support the weight of the tailgate. *Use your discretion on weight capability of one strap. The gate saver does not support any weight. *If your truck has cables then you will […]

Tailgate Saver Installation for 1967-1972 Trucks

Option A: 1. Remove the lower bolt on the driver side tailgate striker plate. 2. Install the longer ball stud with provided thick washer and low profile jam nut. The washer will go between the ball stud base and striker plate. 3. The low profile jam nut goes behind the taillight opening (Apply blue thread […]

Wheel Tub Installation for Classic Trucks Instructions

Step 1: Center of Axle Normally Center Bolt Hole in Bottom LipMeasure Opening in TubCenter tub on Mark Step 2: Place Tub on Bed SideEven Lip on Tub with Bottom Bed LipTake Fine Point Sharpie – Mark inside of Tub Step 3: Using Magnetic Pin Stripper TapePlace on Bed Side where Plasma will cut 1/8″ […]

Scissor Hinge for Chevy Truck Installation Tips & Tricks

First off, congratulations on the purchase of your LS FAB Universal Scissor Hinges and thank you for your order and support! We put this little list together to help you have the best chance of success with your hinges and learn from our experiences. ★ There is a left and right hinge. The direction of […]

Radius Bed Corners for Chevy Trucks Installation Instructions

Thank you for your purchase of the Apicella Designs 3100 Bed Corner Kit. Please read and review ALL instructions contained in this kit. Apicella Designs is NOT responsible for any personal or property damage deriving from the modification and/or installation of this product. ALL modification and/or installation should be performed by a professional. Step 1: […]

1947-53 Chevy Full Billet Dash Installation Instructions

Congratulations on the purchase of your 1947-1953 Chevy Truck Speaker Grille & Glove Box and thank you for supporting LS Fabrication on our journey. The following instructions will help you fit your new billet speaker grille and glove box to achieve a perfect fit and finish. Keep in mind there’s slight difference from one truck […]

1947-53 Chevy Billet Dash Installation Instructions

The following instructions will help you fit your new billet speaker grille and glove box to achieve a perfect fit and finish. Keep inmind there’s slight difference from one truck to another, but we assure you that with some patience and using our pictures asreference you can have your new billet dash pieces nicely installed […]

1955-59 Chevy Firewall Filler Panel Installation Instructions

1. First remove any impeding wires, bolts, screws and or braces from the outside wall and the same to the inside of cab. There should be no interior, wires, or impeding parts or materials that could damage or catch fire. 2. Place filler panel onto the outside of driver and passenger side firewall and check […]

1947-54 Chevy Firewall Filler Panel Instructions

1. First remove any impeding wires, bolts, screws and or braces from the outside wall and the same to the inside of cab. There should be no interior, wires, or impeding parts or materials that could damage or catch fire. 2. Place filler panel onto the outside of driver and passenger side firewall and check […]