ABS headliner kit to replace existing cardboard headliner. Black in colour with haircell texture finish. Can be left exposed, painted or covered with fabric.
– Has floating center trim. Trim slides over front panel then rear panel slides into back side of floating trim.
-Center roof supports still appear on some trucks but no center trims screw into it. Other cabs have no roof supports installed at all.
-Weather stripping has a welded channel around the door and is slid into place. No screw fasteners are required.
-The center trim is located farther back in the cab.
– NO filler strips from factory were required to fill the gaps located on the pillars between the windshield and door weather stripping .
The UNICORN cab!
This cab falls between the early and late 49 cabs.
-The weatherstripping rubber trim in this cab is held on with the new style slide in retainer that is spot welded to the cab interior face.
-The roof center trim is still the screw in type and located closer towards the front windshield and not as far back as the later years.
Contact White Wolf directly if you have this cab prior to ordering with LS Fab so the correct kit can be substituted. [email protected]